M10X1.5 D6 SPIRAL FLUTE BLUE SHARK TAP

FOR STAINLESS STEELS

Designed for superior performance blind hole tapping in a wide range of Stainless Steel types.

MATERIAL:
Shark taps are manufactured from a unique powder metallurgy tool steel different from any other HSS-E-PM. This provides an unbeatable combination of toughness and edge strength, allowing the taps to perform at higher cutting temperatures while offering excellent performance and longer tool life.

• Higher impact toughness
• Increased hot hardness
• Consistent hardness

GEOMETRY AND CHAMFER
Thread geometry with optimized form generates:

• Low torque
• Excellent threads at both high and low speeds
• Superior surface finish

SURFACE TREATMENT
Super-B is a low friction TiAlN+WC/C self lubricating hard coating which prevents built-up edge and provides very high wear resistance. This is particularly advantageous when threading tough, long-chipping, heat resistant materials such as stainless steel.

FEATURES:

• The color ring on the tool shank identifies suitability for specific materials and enables quick and easy tool selection.
• Significant reduction in axial forces and torque compared to conventional taps. This ensures problem-free threading of blind and through holes in the selected material.
• Standard ANSI shank and square with DIN overall length, for extra reach and compatibility with Inch Standard Tap Holding.
• Spiral flute taps incorporate a special edge treatment to increase strength and reduce the chance of micro-chipping on the cutting edges. This considerably improves performance and tool life.
• The back taper on spiral flute Blue Shark facilitates chip evacuation, reducing chipping on the last threads of the taps and also reducing torque when the tap reverses.

DORMER 10X1.5MM D6 TIALN COATED COBALT SPIRAL FLUTE BLUE SHARK TAP