EDGE VISE SQUARE WITH .0005 INDICATOR

The Vise Square will standardize the process your shop uses to install vises and it will achieve perfect results every time. Spend less time on setup and more time machining parts.

FEATURES:

• A more reliable method to align the vise to the mill table.
• Eliminate the guesswork by allowing you to monitor the movement of the right side and the left side of the vise jaw simultaneously. Using the spindle mounted test style indicator to monitor the left side of the jaw while the high precision five tenths indicator mounted in the Vise Square monitors the right side of the jaw.
• Attaches to the mill table in just a few seconds. Each leg of the Vise Square has a solid ball tip set screw one side and a spring loaded ball tip set screw on the opposite side. The set screws accurately position the Vise Square in the t-slot. The feet of the Vise Square are parallel to the t-slot during installation.
• Graduation indicator – .0005".
• Rigidity mounts to the t-slots in mill table.
• High strength alloy construction.
• Detent ball set screws used for precision alignment in t-slot.
• Compatible with 6" vise widths only and does not work with rotating vise base plates. 5/8" t-slot widths only.

EDGE TECHNOLOGY VISE SQUARE WITH 0.0005" INDICATOR