2-3IN DIGITAL 90DEG USA CHAMFER GAGE

With digital readout and SPC capabilities to instantly measure top diameter of tapered holes.

Designed to measure the top diameter of chamfers, countersinks, center drills, or tapered holes. Press the Electronic chamfer gage’s spring-loaded gaging plunger into the piece being measured and directly read the size in .0002” or .005mm with the SAME gage. Or, at the press of a button, change to Comparative Mode from a known standard.

FEATURES:

• AGD Group 2 indicator has large, easy-to-read, LCD Digital Display, with three modes, dimensional “Hold”, and full 360° rotational bezel, for convenient and error-free viewing.
• Full SPC capabilities: compatible with virtually any brand of equipment, directly through gage port.
• Equipped with a hardened tool steel gaging plunger.
• Completely self-contained and fully portable, with no tandem units, attachments, cables or external power required.
• Guaranteed Accuracy: ±.0005” for 90° Models; ±.0009” for 127° models. Repeatability: within ±1 least significant digit.
• Two modes: Direct reading as called out on part print; and plus/minus comparative from a “Zero” established with master or verified piece part.
• True, instant, inch/metric switchability to measure the same reading in either inches or mm with the push of a button.
• No setting masters (standards) or look-up-charts required.
• Battery powered or can be through its A/C Adapter or directly from a printer, PC, data collector, etc.

2-3IN DIGITAL 90 DEGREE USA CHAMFER GAGE