PHASE-A-MATIC UL-200HD PHASE CONVERTER

Designed especially for running three-phase 230V Machine Tools and Motors from single-phase 230V power.

FEATURES:

• No more changing motors or switch gear.
• Simple installation.
• Reliability has proven exceptionally good.
• Runs three-phase motors from single-phase power at 2/3 rated HP.
• Model UL-100HD to UL-900HD height: 11.25”

HOW TO ORDER…

• The largest motor on your machine must fall within the minimum and maximum range of the converter.
• Do not order a larger unit or heavy duty model thinking it will give you more horsepower.

WHEN TO USE HEAVY DUTY…

• Lathes above 3 HP not fitted with a clutch.
• Air compressors: The motor pulley diameter must also be reduced by 1/3* (*On delta-wound motors, pulley must be reduced by 50%), or a 50% larger motor can be fitted.
• For long, heavy starting cycles, frequent starting, instant reversing, unattended motors or equipment.
• If jogging is required, or if there is a good chance of the motor being stalled during use.

Guaranteed 12 months against manufacturing defects.

PHASE-A-MATIC UL-200HD CERTIFIED PHASE CONVERTER