TALONGRIP 50MM LONG SERRATED GRIPS

TalonGrip™ Long Length Serrated Grips – 2 Per Pack

Designed as a “drop fit” into the TalonGrip™ Jaw Sets or for use on a fixture, with a gripping height range of .050 – .160”.

FEATURES:

• For applications where specific grip location is not necessary or higher and full length penetration is desired.
• Made from S7, heat-treated and finished with a black oxide coating.
• Each grip is laser engraved with a 10mm scale for reference on repeatable part placement.
• #10-32×1/2” and M5×12 screws provided. Due to the similar thread pitch on both of these screws, either may be used in M5 threaded holes as long as they do not exceed 1” (25mm) in length. The 10-32 seats better in the gripper rail and is less likely to bind during removal.

10-32×1/2 and M5×12 screws provided. Due to the similar thread pitch on both of these screws, either may be used in M5 threaded holes
as long as they do not exceed 1” (25mm) in length. The 10-32 seats better in the gripper rail and is less likely to bind during removal.

MITEE-BITE 50MM TALONGRIP LONG LENGTH SERRATED GRIPS